Posts Tagged ‘CO poisoning’

The Six P’s, and some more!

December 11, 2012

Some may have heard the expression before:  “Proper Planning Prevents Pretty Poor Performance” or possibly a less pleasant version, but I will leave that to your imagination.  Permutations previewed in this photo provide possibilities for a plethora of problems, primarily CO poisoning!

Please provide proper ventilation for atmospheric combustion equipment such as the water heater shown here. VLUU L200  / Samsung L200

VLUU L200  / Samsung L200This is common configuration for a water heater, drawing combustion air from its surroundings, but it can create problems!

Pressures in a house can change and affect equipment like this.  Our predecessors discovered that it was more pleasant when smoke from the fire went up the chimney.  It’s more than pleasant but imperative! 

This chimney shown is going downhill before it goes up, the primary problem! Our heating equipment needs to be vented properly or those gasses enter our homes.  Consider having your combustion equipment checked as part of a whole house assessment

Please, a plug, poke, or paltry plea, proper planning provides prime performance, and prevents poisoning (CO that is!).

Pthanks,

Jason

 

Protect yourself and your family from CO (carbon monoxide) poisoning

December 5, 2009

A story in today’s Burlington Free Press again points to the importance of making sure you protect yourself against carbon monoxide poisoning.

As we’ve discussed here before, check out the National Safety Council’s general recommendations.   As mentioned, all homeowners should get at least an annual check-up on their heating and hot-water system to make sure they are operating properly.  And anytime you make changes to your home, from building an addition, to adding air-conditioning, to changing your windows, you should have an expert make sure that all equipment is operating and venting properly. As a secondary measure, all homes should have a CO alarm.

Please, be safe.

Thanks,
Mike


%d bloggers like this: